Which of the following is used on a wireless network to identify the network?

The network name or service set identifier (SSID) – Each wireless network uses a unique network name to identify the network. This name is called the service set identifier (SSID). When you set up your wireless adapter, you specify the SSID.

How do I find my wireless network type?

On Windows, open your settings menu, go to “network & internet”, click “WiFi” in the side menu, then select “Hardware properties”. Bellow the name of your network, you will see the protocol spelled out as “WiFi version (802.11x)”, where “version” will be the version and “x” will correspond to the above table.

What encryption method is used by WPA for wireless networks?

In this type, every client automatically receives a unique encryption key after securely logging on to the network. This key is automatically updated at regular intervals. WPA uses TKIP and WPA2 uses the AES algorithm.

Which of the following wireless networking standards uses?

17 Cards in this Set
Which of the following wireless technology standards can operate at a MAXIMUM of 54Mbps? (Select TWO).802.11a 802.11g
Which of the following wireless networking standards uses a 5GHz frequency?802.11a
Which of the following wireless technology standards has the SHORTEST indoor range?802.11a

What does WEP stand for?

Wired Equivalent Privacy
Wired Equivalent Privacy (WEP) is a security protocol, specified in the IEEE Wireless Fidelity (Wi-Fi) standard, 802.11b. That standard is designed to provide a wireless local area network (WLAN) with a level of security and privacy comparable to what is usually expected of a wired LAN.

What is BGN in WIFI?

About ‘ g ‘ – Wi-Fi standard ‘g’ is currently the most commonly used standard, which uses 2.4GHz frequency to communicate and transfer data. Standard ‘g’ is more tolerant to single interference compared to standard ‘a/b’. … Almost all the latest tablets, laptops, and smartphones supports this Wi-Fi standard.

What type of wireless network connects devices through a wireless access point?

infrastructure wireless network
infrastructure wireless network: A wireless network in which devices connect through a wireless access point.

What are the 802.11 wireless standards?

Generations
Generation/IEEE StandardMaximum LinkrateFrequency
(Wi-Fi 3)* 802.11g6 to 54 Mbit/s2.4 GHz
(Wi-Fi 2)* 802.11a6 to 54 Mbit/s5 GHz
(Wi-Fi 1)* 802.11b1 to 11 Mbit/s2.4 GHz
(Wi-Fi 0)* 802.111 to 2 Mbit/s2.4 GHz

What is the most current wireless networking standard?

IEEE 802.11ac
The current wireless networking standard we all use today is referred to as IEEE 802.11ac. The upcoming standard is called IEEE 802.11ax. But you can just call it Wi-Fi 6.

What are 3 types of wireless connections?

There are basically three different types of wireless networks – WAN, LAN and PAN: Wireless Wide Area Networks (WWAN): WWANs are created through the use of mobile phone signals typically provided and maintained by specific mobile phone (cellular) service providers.

What is wireless link?

1. A wireless transmission comprised by a source node (transmitter) and a destination node (receiver). Learn more in: Joint Link Scheduling and Topology Control for Wireless Sensor Networks with SINR Constraints.

What is wireless network and its types?

There are four types of wireless networks — wireless local area networks, wireless metropolitan area networks, wireless personal area networks and wireless wide area networks — each with its own function. Below we discuss the different types of wireless networks and the various equipment and connections they require.

What is an example of a wireless network?

A wireless network is a computer network that uses wireless data connections between network nodes. … Examples of wireless networks include cell phone networks, wireless local area networks (WLANs), wireless sensor networks, satellite communication networks, and terrestrial microwave networks.

What is wireless network and how it works?

A wireless network uses radio waves, just like cell phones, televisions and radios do. … A computer’s wireless adapter translates data into a radio signal and transmits it using an antenna. A wireless router receives the signal and decodes it.

Is WiFi a wireless network?

Wi-Fi is the wireless technology used to connect computers, tablets, smartphones and other devices to the internet. Wi-Fi is the radio signal sent from a wireless router to a nearby device, which translates the signal into data you can see and use.

What are 3 types of network?

LAN, MAN, and WAN are the three major types of networks designed to operate over the area they cover.

Which network is used inside an organization?

An intranet is a computer network for sharing information, easier communication, collaboration tools, operational systems, and other computing services within an organization, usually to the exclusion of access by outsiders.

What devices are commonly used on the network?

Here is the common network device list:
  • Hub.
  • Switch.
  • Router.
  • Bridge.
  • Gateway.
  • Modem.
  • Repeater.
  • Access Point.

What is networking and example?

An example of networking is sharing and acquiring information between different divisions of the same company to share information and solve business problems. An example of networking is linking the entire network of computers to a print server to allow each workstation to have the ability to print documents.

Why organizations use networks?

The network is considered one of the most critical resources in an organization, both in the private and public sectors. Networks are created to provide a means to satisfy an objective or need. … The accuracy and speed of daily business transactions for large organizations are vital to their success.

Why do Organisations use networks?

A network allows employees to share files, view other people’s work, and exchange ideas more efficiently. … A network makes it easier to back up all of your company’s data on an offsite server, a set of tapes, CDs, or other backup systems. (Of course, another aspect of data protection is data security.)

How computer networks could be used in organization?

Through a computer network, the employees of an organization can access the organization’s databases remotely. In a client-server configuration, the organization’s data is stored in servers, which are powerful computers that can hold massive amounts of data and are managed by system administrators.